View LA7213_988154.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN2874A
Monolithic Linear IC
LA7213
VCR-Use Automatic Channel Selection Peripheral
Overview
The LA7213 is a VCR-use automatic channel selection peripheral IC that contains a sync separator and a vertical sync separator.
Package Dimensions
unit:mm 3042C-SIP5
[LA7213]
9.4 3.0
Functions and Features
* Sync separation. * Vertical sync separation. * Recommended supply voltage : 5V * Open collector output (RL=10k), negative polarity output.
7.9max 3.8 6.5 1.2 min
1 1.5 0.6 2.0
5 0.6
0.25 1.33
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg
Ta75C
SANYO : SIP5
Conditions
Ratings 7.0 100 -15 to +75 -40 to +125
Unit V mW
C C
Operating Conditions at Ta = 25C
Parameter Recommended supply voltage Operating voltage Symbol VCC VCC op Conditions Ratings 5.0 4 to 6 Unit V V
Operating Characteristics at Ta = 25C, VCC=5V
Parameter Circuit current Sync separation operating current Sync separation minimum input level Vertical sync separation output time delay Output DC level Output DC level Output DC level Output DC level Symbol ICC ISYNC VI min TVOUT V2H V2L V4H V4L No load SW1=b Color bar signal 1Vp-p=0dB, SW1=a Color bar of input=1Vp-p, SW1=a No load No load No load No load 4.9 0.2 5 4.9 0.2 Conditions Ratings min 0.5 typ 0.9 85 -12 10 20 max 1.5 Unit mA A dB s V V V V
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
42000TN (KT)/D1295TH/20893TS/9028YT, TS No.2874-1/2
LA7213
Block Diagram
Test Circuit
Sample Application Circuit
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of April, 2000. Specifications and information herein are subject to change without notice.
PS No.2874-2/2

▲Up To Search▲

Price & Availability of LA7213

	To Download LA7213 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .